A wireless adapter is a device that’s used to connect your computer or laptop to the internet wirelessly. The Intel Dual Band Wireless-AC 7260 is a good wireless adapter with a 5GHz speed and limited range. This article will go over some of the reasons why you may be experiencing disconnects with this wireless adapter, and how you can fix your problem. First, let’s take a look at what likely causes the disconnects.
Intel Dual Band Wireless-AC 7260 Disconnects
The most likely cause of the disconnects is interference. This could be something like a cordless phone near your computer or laptop, or some other device that’s causing interference. Other reasons why this might happen are high levels of electromagnetic radiation or if you’re running an older operating system. The final issue that might cause these disconnects is if your wireless connection is prioritized over your wired connection when it comes to bandwidth. So, let’s go over some ways to fix these problems.
– Take Your Device Out Of Auto-Connect Mode
If you’re experiencing disconnects because your wireless adapter is prioritized over your wired connection, then try disabling the auto-connect mode on the Intel Dual Band Wireless-AC 7260 and see if that resolves the problem. If you don’t want to disable it for whatever reason, then set it to prioritize connectivity from your computer to the internet and not vice versa.
Reasons For Intel Dual Band Wireless-AC 7260 Disconnects
There are many reasons why you may be experiencing disconnects with this wireless adapter. The most common reason is interference from other wireless devices. For example, if you’re in a crowded area that has a lot of other wireless devices that are on the same frequency, your connection could be affected. Other causes for disconnects may include problems with your network or router or problems with the wireless adapter.
Solutions To Fixing Intel Dual Band Wireless-AC 7260 Disconnects
Sometimes the range of your wireless adapter is too short. This can cause disconnects, especially if you’re trying to connect to a hotspot that’s a long-distance away. You can extend the range of your wireless adapter by placing it closer to your device.
Also Read: How to Reset Your Windows Credentials
Another reason for disconnects could be because of interference from outside sources such as cordless phones and microwaves. If this is the case, move or shut off these devices so they won’t interfere with your wireless signal.
Another possible reason for disconnects could be that one appliance, in particular, is interrupting the connection. You can test which appliance is causing the problem and unplug it if necessary.
There are more reasons why disconnects might occur and some of those are: interference from other devices on your network, power fluctuations, low power in transmitters, and hardware issues with your antennae. To fix these problems you’ll need to reboot your computer’s hardware or router’s software.
If your Intel Dual Band Wireless-AC 7260 keeps disconnecting, this troubleshooting guide is for you.
Intel Dual Band Wireless-AC 7260 disconnects are usually caused by something called “re-association frames,” which means wireless clients are not consistently looking for and finding your wireless access point. Wireless clients that are experiencing these issues should be able to reconnect to your wireless access point.
A few things to consider:
1. Do you have a weak signal from your access point?
2. Is your access point correctly channelized?
3. Is your wireless client properly configured?
4. Are you using a wireless client that is not compatible with your access point?